11/10/2022 0 Comments Samsung s gear 2 watch![]() ![]() Once it starts working, you can dry off the Gear S2. You can test it by pressing it under water, although we would recommend that you take it out of the water before pressing it. The “malfunctioning” button will come to life after some time. Possible Solution : Run the Gear S2 under the shower, or dunk it into a bowl of water. However, it magically came back to life after a shower test… twice! Out of the shower, we experienced problems with the Back button (that’s the upper button) on the Gear S2. This will shake out whatever water is inside the case, and the Gear S2 will boot up properly. Do the same, just harder, against the palm. In the video above, you see me tapping that edge against the table. Possible Solution #2 : If the reboot loop persists, hold the Gear S2 in one hand and tap the edge with the two buttons firmly against the palm of the other hand. After it shuts down properly, you can power it up and it will boot up normally. It may take you 15 minutes or more to do so. Then press the Home / Power button (that’s the lower button) until the Gear S2 shuts down. No harm done. But if you are stuck in a reboot loop, dry off the Samsung Gear S2 and shake it to remove any water that may have seeped under the buttons. Possible Solution #1 : If it only reboots once, just let it boot up and it will continue on its merry way. But we managed to get it to boot up properly. Despite our best efforts, it refused to shut down or boot up properly for at least 15 minutes. The first and last occasions were particularly severe with the Gear S2 stuck on a reboot loop. The buttons were not being pressed, or the bezel turned, when it rebooted by itself. In all three instances, the Gear S2 was not being used, just worn on the wrist. On three occasions, the Samsung Gear S2 automatically rebooted itself while being subjected to a shower test. Now, let’s take a look at the two Gear S2 issues we identified, and their solutions. Only divers should not take their Gear S or newer Gear S2 on their dives. The earlier Gear S smartwatch was only IP67-certified, which means it is only rated to a shallower water depth of 1 meter for up to 30 minutes.įor all intents and purposes though, both the Gear S and the newer Gear S2 are “waterproof” enough for you to wear them when you take a bath, swim or even go snorkelling. Officially, the IP68 rating means the Gear S2 is able to withstand a water depth of 1.5 meters for up to 30 minutes. The Samsung Gear S2 boasts an improved IP68 rating – one notch above that of its predecessor, the Gear S, when it comes to protection against water ingress. The IP (Ingress Protection) rating is an international certification of a device’s ability to withstand the ingress of dust or dirt (the first number), and moisture or water (the second number). Updated 30-03-2016 : Added a second video showing our Gear S2 in its dying throes, and our experience sending it for inspection and repair. We also added additional information, includinga new solution for this problem. Updated 20-01-2016 : Added a video showing one of the Gear S2 issues we identified – the reboot loop. Let’s take a look at what those problems are and how you can solve them. However, we identified two Gear S2 issues with water exposure. ![]() It was also noticeably worked better with water, easily tackling rain drops and showers that would have driven the earlier Gear S crazy. Samsung eschewed the rectangular Gear S design for the more elegant round face in the Gear S2. The new Samsung Gear S2 is a really impressive smartwatch. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |